Синтезатор ASM Hydrasynth Deluxe

FEATURES

Dual Sound Engines

The HYDRASYNTH DELUXE offers 16 voices of polyphony in SINGLE mode, that can be split into two completely separate 8 voice sound engines in MULTI mode. The two MULTI modes for separate sound engine operation includes KEYSPLIT which creates classic keyboard splitting between two patches, and DUAL which enables layering of two patches over the whole keyboard. A dedicated balance knob for direct adjustment of the mix between LOWER and UPPER parts of the MULTI patch is available on the panel, as well as separate stereo audio outputs and MIDI channel assignments for true bi-timbral operation.

Polytouch™ keybed

The HYDRASYNTH DELUXE features the ASM Polytouch® 73-note semi-weighted keybed, allowing both ON/OFF velocity and aftertouch as well as full polyphonic aftertouch. In recent years companies have been trying to find ways to give the keyboard musician more ways to better express themselves. The problem is that their solution is almost never a keyboard, so you have to learn a new technique to play them. The Polytouch™ 73-note keybed features high quality, standard sized keys, so you can start playing it instantly.

Ribbon Controller

Add expression to any patch using the 4-octave Ribbon Controller, perfectly situated above the keyboard. The Ribbon Controller is freely assignable as a source in the Mod Matrix, but it can also be used in Theremin Mode where it will send both trigger and pitch.

Oscillators

The tone generation capability is the heart of any synthesizer. The oscillators allow you to choose from a selection of 219 single cycle waveforms. Wavemorphing is a feature usually found on synths with preset wave tables. Creating user wavetables is arduous or downright impossible. Unlike most wavetable synths, our oscillators 1 & 2 have our WAVELIST mode. This mode  allows you to pick and choose 8 waves, from our bank of 219, arrange them in the order you want, and then morph from one to another.

Mutators

Oscillators 1 & 2 are routed into our MUTATORS. The Mutators allow you to modulate, bend and sculpt the sound in new (and old) ways. Each MUTANT allows you to choose from the following processes:

• FM-Linear – for making classic FM sounds. Choose multiple FM sources, including external inputs.

• Wavestack™ – creates 5 copies of the incoming sound and allows you to set a detune amount.

• Hard Sync – This gives you those classic hard sync sounds. Try hard syncing a morphing wavetable for some fun.

• Pulse Width – This will pulse width modulate ANY input sound.

• PW – Squeeze – This is a different form of pulse width mod that creates a smoother sound.

• PW-ASM – this mode divides the incoming wave into 8 slices and allows you to set how much pulse width mod will happen in each section.

• Harmonic Sweep – this will sweep the harmonics of the incoming sound.​

• PhazDiff – this takes the input signal, shifts the phase and then creates a difference result with the original signal

The Mutant’s can also generate its own waveforms in both FM and Sync modes so that you do not have use another oscillator….Of course the routing is flexible so you can choose the other oscillators as mod sources if you like.

Mixer/ filter routing

The Oscillators are fed into a mixer along with the Noise generator and Ring Modulator. The Mixer allows you to mix levels as well as pan the input source. There is a balance control that allows you to choose how much signal of each source is routed to filters 1 and 2. The filters can be set to be parallel or series for ultimate flexibility.

Filters

If oscillators and tone generators are the heart of a synthesizer, the filters are the soul. ​The first filter has 16 different filter models, giving you multiple options for tailoring your sound. The second filter is a 12db per octave has a continuous sweep from either low pass > bandpass >high pass or low pass > notch > high pass, similar to the way the classic SEM filter worked.

LFO’s

5 Low-Frequency Oscillators…YES, 5. Much like our sound engine, the LFO’s are not ordinary by any means. The Hydrasynth LFO’s feature a STEP mode that allows you to create patterns with up to 64 steps. Having 5 mini step sequencers gives you an amazing amount of possibilities for further shaping your sound.  Of course, there are also 10 standard waveforms to choose from.​ The LFO’s all have delay, fade in, 3 triggering modes, smoothing, start phase, one-shot mode so that they can act as envelopes and BPM sync.

Envelopes

5 DAHDSR Envelopes……YES 5. An advanced sound engine needs plenty of modulation sources. Our 6 stage envelopes feature Delay, Attack, Hold, Decay, Sustain and Release stages. The time settings for the stage can be set in seconds or in time divisions, giving you envelopes that play in sync to your song. You can also loop the envelopes to create LFO’s whose shape can be voltage controlled in the modulation matrix. The envelopes have the added ability to be triggered from multiple sources.

MODULATION MATRIX

The modulation capabilities on the Hydrasynth are endless. With 32 user definable modulation routings, you will have plenty of ways to use the 29 modulation sources and 155 modulation destinations. Almost everything in the synth engine can be a modulation destination including the effects and arpeggiator. The Modulation matrix points themselves can also become modulation destinations. Modulation sources & destinations include the CV Mod In & Out jacks as well as MIDI CC’s

ARPEGGIATOR

In MULTI mode, the UPPER and LOWER part can have its own separate arpeggiator settings. The arpeggiator allows for standard note arpeggiations but also has a phrase arpeggio built-in. Parameters like RATCHET and CHANCE will generate other rhythmic patterns with some randomness to add life and spontaneity to your performance. You can also modulate most of the parameters in the arpeggiator so imagine using LFO’s, Envelopes, Polyphonic Aftertouch or the Ribbon controller to modify your arpeggios in real time.

CV/GATE – MIDI – USB

The HYDRASYNTH DELUXE can have separate MIDI channels assigned to its LOWER and UPPER part in MULTI mode. The CV/GATE settings will respond to the UPPER part.​ There is the standard MIDI and USB/MIDI interfaces on the synth but we go deeper and allow the use of CV/GATE interfaces for connecting to the modular world. It supports the standard voltages for Eurorack modulars, the 1.2V per octave Buchla standard, as well as some of the Japanese Volts>HZ products. The MOD in and outs allow for modulation from DC to full audio ranges, expanding your modulation capabilities.

Main Controls

The Main system controls are where you navigate your patches in both SINGLE and MULTI mode, configure system settings and see parameters like the envelopes, waveforms, filters in the OLED screen.​ Init and Random buttons will allow you to initialize or randomize a complete patch or specific modules with a press & hold + module select button. Pressing the HOME button returns you to navigating patches in a simple and easy way.

Master controls

The Master Control section is where all parameter editing, patch naming, and Macro performing is done.​ Using OLED screens, high-resolution encoders with LED rings, and 8 buttons, this section is designed to give you good feedback on what is going on. The VOICE parameters give you access to play modes, micro-tuning, analog feel, voice panning and many other features.

Macros

The patch MACROS are designed to allow the user deep control over the engine in live performance. In the HYDRASYNTH DELUXE, it is possible to control the macros of both the LOWER and UPPER parts in MULTI mode at the same time. The 8 assignable encoders and buttons can each be routed to 8 destinations. Complete sound transformations can take place with the press of a button or turn of a knob.

Patches

The Hydrasynth comes with 8 banks of 128 patches in SINGLE mode. There are 5 banks of 128 MULTI mode patches and these both hold a LOWER and UPPER patch which are separate from the SINGLE patches. Finding the patch you want and searching the library is made easy with our BROWSER. Our PC/MAC based Patch Manager application also allows easy moving of patches to create your favorite order as well as load in new patch libraries in the future.

Effects

The effects chain goes beyond the typical ones found in other synths. Pre-effects and post-effects give you some unique ways to process your sound. In the HYDRASYNTH DELUXE, the MULTI mode enables two completely separate effects chains for the LOWER and UPPER parts. The delays and reverbs were modeled on some of the most popular effects on the market. The effects are the perfect way to complete your sound, in the box.

Physical Specifications

Metal Chassis
•　Steel top and bottom
•　Aluminum side panels
•　Detachable laptop shelf

Polytouch® Keybed
•　73 keys, semi-weighted
•　Polyphonic aftertouch
•　Note On and Note Off Velocity

4-octave Ribbon Controller (67 cm, 26.4”)
•　Pitch Bend mode
•　Mod Only mode – use the ribbon as a modulation source
•　Theremin mode – the ribbon triggers a note
◦　Choose continuous pitch or one of 60 scales, including microtonal
◦　Selectable range: 2, 4, or 6 octaves
•　Ribbon can be CV source

Additional Hardware Controls
•　Octave Up/Down buttons for instant transposition
•　Chord mode button: stack up to 8 notes in a chord
•　Pitch bend / modulation controls with adjustable depth
•　Balance knob controls relative levels of Upper / Lower patches in Multi mode

Patch Memory
•　8 banks of 128 patches in Single mode
•　5 banks of 128 patches in Multi mode
◦　Each Multi contains two complete Hydrasynth patches: one for the Upper part, one for the Lower part
◦　Upper / Lower patches are independent of Single mode patches
•　Sort patches by Patch number, Name, or Category
•　Browse Favorites: Select 128 patches from any bank, including Singles or Multis, for immediate access

CV / Gate Inputs and Outputs
•　Supports multiple CV / Gate standards
◦　CV
-　1v per octave 0-10V
-　1v per octave +/-5V
-　Hz to Volts 0-10V
-　1.2V per octave
-　Adjustable offset: +/-99 cents
-　Adjustable reference note: C-1 to G9
◦　Gate
-　V-trig, S-trig
-　3V, 5V, 10V
◦　Mod In / Out range
-　+/-5V, 0-10V, 0-5V, 0-1V
-　Adjustable offset: +/-3V
◦　Clock Out
-　1PPS, 2PPQ, 24PPQ, 48 PPQ
-　Clock Voltage: 3v, 5V, 10V
-　Selectable clock division: Off, 1/2, 2, 4
-　Adjustable offset: +/- 100ms

MIDI IN / OUT / THRU
•　Voice overflow mode to expand polyphony with a second Hydrasynth

Expression pedal input
•　Selectable curves and polarity

Sustain pedal input
•　Polarity sensing
•　Three modes of operation: Sustain, Sostenuto, and Modulation Only

DC input jack

USB port
•　Supports USB MIDI In / Out

Audio outputs
•　Stereo analog outputs: two pairs (balanced)
◦　Automatic routing when Upper / Lower outputs are connected
•　Two headphone connectors
◦　6.35 mm (1⁄4 inch) and 3.5 mm
◦　Shared volume control
◦　Impedance: 16 – 75 Ohm

Dimensions
•　Without Shelf: 113.1 x 34.9 x 11.9 cm (44.53” x 13.74” x 4.65” inches)
•　Shelf installed: 113.1 x 42.3 x 11.9 cm (44.53” x 16.65” x 4.65” inches)

Weight
•　13.3 kg (29.33 lbs)